NT Error Codes |
Error Number |
Error Message |
Advice / Fix | ||
600 | An operation is pending | 600 | ||
601 | The port handle is invalid | 601 | ||
602 | The port is already open | 602 | ||
603 | The buffer is too small | 603 | ||
604 | Wrong information specified | 604 | ||
605 | Cannot set port information | 605 | ||
606 | The port is not connected | 606 | ||
607 | The event is invalid | 607 | ||
608 | The device does not exist | 608 | ||
609 | The device type does not exist | 609 | ||
610 | The buffer is invalid | N/A | ||
611 | The route is not available | N/A | ||
612 | The route is not allocated | N/A | ||
613 | Invalid compression specified | N/A | ||
614 | Out of buffers | N/A | ||
615 | The port was not found | N/A | ||
616 | An asynchronous request is pending | N/A | ||
617 | The port or device is already disconnecting | N/A | ||
618 | The port is not open | N/A | ||
619 | The port is disconnected | N/A | ||
620 | There are no endpoints | N/A | ||
621 | Cannot open the phone book file | N/A | ||
622 | Cannot load the phone book file | N/A | ||
623 | Cannot find the phone book entry | N/A | ||
624 | Cannot write the phone book file | N/A | ||
625 | Invalid information found in the phone book | N/A | ||
626 | Cannot load a string | N/A | ||
627 | Cannot find key | N/A | ||
628 | The port was disconnected | N/A | ||
629 | The port was disconnected by the remote machine | N/A | ||
630 | The port was disconnected due to hardware failure | N/A | ||
631 | The port was disconnected by the user | N/A | ||
632 | The structure size is incorrect | N/A | ||
633 | The port is already in use or is not configured for Remote Access dialout | N/A | ||
634 | Cannot register your computer on the remote network | N/A | ||
635 | Unknown error | N/A | ||
636 | The wrong device is attached to the port | N/A | ||
637 | The string could not be converted | N/A | ||
638 | The request has timed out | N/A | ||
639 | No asynchronous net available | N/A | ||
640 | A NetBIOS error has occurred | N/A | ||
641 | The server cannot allocate NetBIOS resources needed to support the client | N/A | ||
642 | One of your NetBIOS names is already registered on the remote network | N/A | ||
643 | A network adapter at the server failed | N/A | ||
644 | You will not receive network message popups | N/A | ||
645 | Internal authentication error | N/A | ||
646 | The account is not permitted to log on at this time of day | N/A | ||
647 | The account is disabled | N/A | ||
648 | The password has expired | N/A | ||
649 | The account does not have Remote Access permission | N/A | ||
650 | The Remote Access server is not responding | N/A | ||
651 | Your modem (or other connecting device) has reported an error | N/A | ||
652 | Unrecognized response from the device | N/A | ||
653 | A macro required by the device was not found in the device .INF file section | N/A | ||
654 | A command or response in the device .INF file section refers to an undefined macro | N/A | ||
655 |
The macro was not found in the device .INF file section | N/A | ||
656 |
The macro in the device .INF file section contains an undefined macro. | N/A | ||
657 | The device .INF file could not be opened | N/A | ||
658 | The device name in the device .INF or media .INI file is too long | N/A | ||
659 | The media .INI file refers to an unknown device name | N/A | ||
660 | The device .INF file contains no responses for the command | N/A | ||
661 | The device .INF file is missing a command | N/A | ||
662 | Attempted to set a macro not listed in device .INF file section | N/A | ||
663 | The media .INI file refers to an unknown device type | N/A | ||
664 | Cannot allocate memory | N/A | ||
665 | The port is not configured for Remote Access | N/A | ||
666 | Your modem (or other connecting device) is not functioning | N/A | ||
667 | Cannot read the media .INI file | N/A | ||
668 | The connection dropped | N/A | ||
669 | The usage parameter in the media .INI file is invalid | N/A | ||
670 | Cannot read the section name from the media .INI file | N/A | ||
671 | Cannot read the device type from the media .INI file | N/A | ||
672 | Cannot read the device name from the media .INI file | N/A | ||
673 | Cannot read the usage from the media .INI file | N/A | ||
674 | Cannot read the maximum connection BPS rate from the media .INI file | N/A | ||
675 | Cannot read the maximum carrier BPS rate from the media .INI file | N/A | ||
676 | The line is busy | N/A | ||
677 | A person answered instead of a modem | N/A | ||
678 | There is no answer | N/A | ||
679 | Cannot detect carrier | N/A | ||
680 | There is no dial tone | N/A | ||
681 | General error reported by device | N/A | ||
682 | ERROR WRITING SECTIONNAME | N/A | ||
683 | ERROR WRITING DEVICETYPE | N/A | ||
684 | ERROR WRITING DEVICENAME | N/A | ||
685 | ERROR WRITING MAXCONNECTBPS | N/A | ||
686 | ERROR WRITING MAXCARRIERBPS | N/A | ||
687 | ERROR WRITING USAGE | N/A | ||
688 | ERROR WRITING DEFAULTOFF | N/A | ||
689 | ERROR READING DEFAULTOFF | N/A | ||
690 | ERROR EMPTY INI FILE | N/A | ||
691 | Access denied because username and/or password is invalid on the domain | N/A | ||
692 | Hardware failure in port or attached device | N/A | ||
693 | ERROR NOT BINARY MACRO | N/A | ||
694 | ERROR DCB NOT FOUND | N/A | ||
695 | ERROR STATE MACHINES NOT STARTED | N/A | ||
696 | ERROR STATE MACHINES ALREADY STARTED | N/A | ||
697 | ERROR PARTIAL RESPONSE LOOPING | N/A | ||
698 | A response keyname in the device .INF file is not in the expected format | N/A | ||
699 | The device response caused buffer overflow | N/A | ||
700 | The expanded command in the device .INF file is too long | N/A | ||
701 | The device moved to a BPS rate not supported by the COM driver | N/A | ||
702 | Device response received when none expected | N/A | ||
703 | ERROR INTERACTIVE MODE | N/A | ||
704 | ERROR BAD CALLBACK NUMBER | N/A | ||
705 | ERROR INVALID AUTH STATE | N/A | ||
706 | ERROR WRITING INITBPS | N/A | ||
707 | X.25 diagnostic indication | N/A | ||
708 | The account has expired | N/A | ||
709 | Error changing password on domain | N/A | ||
710 | Serial overrun errors were detected while communicating with your modem | N/A | ||
711 | RasMan initialization failure. Check the event log | N/A | ||
712 | Biplex port is initializing. Wait a few seconds and redial | N/A | ||
713 | No active ISDN lines are available | N/A | ||
714 | Not enough ISDN channels are available to make the call | N/A | ||
715 | Too many errors occurred because of poor phone line quality | N/A | ||
716 | The Remote Access IP configuration is unusable | N/A | ||
717 | No IP addresses are available in the static pool of Remote Access IP addresses | N/A | ||
718 | PPP timeout | N/A | ||
719 | PPP terminated by remote machine | N/A | ||
720 | No PPP control protocols configured | N/A | ||
721 | Remote PPP peer is not responding | N/A | ||
722 | The PPP packet is invalid | N/A | ||
723 | The phone number, including prefix and suffix, is too long | N/A | ||
724 | The IPX protocol cannot dial-out on the port because the computer is an IPX router | N/A | ||
725 | The IPX protocol cannot dial-in on the port because the IPX router is not installed | N/A | ||
726 | The IPX protocol cannot be used for dial-out on more than one port at a time | N/A | ||
727 | Cannot access TCPCFG.DLL | N/A | ||
728 | Cannot find an IP adapter bound to Remote Access | N/A | ||
729 | SLIP cannot be used unless the IP protocol is installed | N/A | ||
730 | Computer registration is not complete | N/A | ||
731 | The protocol is not configured | N/A | ||
732 | The PPP negotiation is not converging | N/A | ||
733 | The PPP control protocol for this network protocol is not available on the server | N/A | ||
734 | The PPP link control protocol terminated | N/A | ||
735 | The requested address was rejected by the server | N/A | ||
736 | The remote computer terminated the control protocol | N/A | ||
737 | Loopback detected | N/A | ||
738 | The server did not assign an address | N/A | ||
739 | The remote server cannot use the Windows NT encrypted password | N/A | ||
740 | TAPI devices configured for Remote Access failed to initialize or not installed correctly | N/A | ||
741 | The local computer does not support encryption | N/A | ||
742 | The remote server does not support encryption | N/A | ||
743 | The remote server requires encryption | N/A | ||
744 | Cannot use the IPX net number assigned by the remote server. Check the event log | N/A | ||
752 | A syntax error was encountered while processing a script | N/A |